Juniper Creating Policy with Term
Here I create three terms on a single policy-statement. Policy Statement Name is “Upstream”. First term name ISP-1, Second term ISP-2, Third term name is ISP-3 and Finally I make… Read more »
Here I create three terms on a single policy-statement. Policy Statement Name is “Upstream”. First term name ISP-1, Second term ISP-2, Third term name is ISP-3 and Finally I make… Read more »
Viewing the VPN Routing Tables You want to check the routing tables on the PE routers to determine that they contain all the expected routes. The show route command displays… Read more »
A advantage of route lists over prefix lists is that each prefix can include an action. When a match occurs, the action is taken immediately instead of waiting to reach… Read more »
The Junos OS routing protocol process assigns a default preference value (also known as an administrative distance) to each route that the routing table receives. The default value depends on… Read more »
Configure Aggregate Routes in Juniper You want to aggregate some of the routes in the routing table to reduce the size of the tables and to minimize the amount of… Read more »
Juniper Static Router with Preference Use qualified-next-hop to allow independent preference for static routes to the same destination: Primary next hop due to default route preference (5) Secondary next hop due… Read more »
Juniper IPv6 Static Routes Configuration You want to be able to connect your router to the Internet. Create a default static route: # set routing-options rib inet6.0 static route 0::/0 next-hop 3001::1… Read more »
Juniper Show the Routes in the Routing Table You want to check the routing table to see that it contains the routes you expect to other routers in your domain… Read more »
Juniper View Routes to a Particular Prefix You need to check to make sure the local router has a route to another router in the network. Use the following version… Read more »
Static Routes Configuration in Juniper You want to be able to connect your router to the Internet. Create a default static route: # set routing-options static route 0.0.0.0/0 next-hop 172.16.100.1… Read more »